0.44 Magnum

    ATTENTION! This is not a real gun!!! It cannot shoot. But it is very realistic.

    All parts can be found here: https://www.thingiverse.com/thing:3004363

    The gun consists of 33 different pieces. All parts were printed at 0.1mm high, for good final quality. Some smaller pieces were printed at 100% infill, the rest at 20% infill.

    It took me about a week to print all the pieces.

    I leave here a photo of the final result after being printed and without any painting and treatment, etc.

Fig.1 - All parts of the 0.44 Magnum.

Fig.2 - All parts of the 0.44 Magnum II.

    The gun holder was modified by me in a way that had my name written.

Fig.3 - Modified gun holder.

    Here we can see all the parts already sanded and the primary applied. This is a process that can take several days.

Fig.4 - Sanded and primed.

    The final result of all the parts already ready. Next step, final assembly.

Fig.5 - All ready final parts.

    Final result of the weapon, already assembled.

Fig.6 - Gun 0.44 Magnum.

Fig.7 - Gun 0.44 Magnum II.

Fig.8 - Gun 0.44 Magnum III.

Fig.9 - Gun 0.44 Magnum IV.

Fig.10 - Gun 0.44 Magnum V.