A few years ago, i bought this all-metal piece to support the drill.
The piece holding the drill ended up breaking. It was years and years like that, it was never used again. Until I decided to make a new one, here's what came out:
Fig.1 - Drill holder.
Fig.2 - Drill holder II
Fig.3 - Drill holder III.
Fig.4 - Drill holder with drill.
Fig.5 - Drill holder with drill II.
Fig.6 - Drill holder overview.
The previous piece was in metal and ended up breaking. The material i used to print this piece was ABS and it's 100% solid,
let's see how long it lasts ...
The tests i did at first, passed all of them.
If the piece is broken, there are two solutions, print another new one, the design / work is already done, just start
printing or if you want to improve, look at which part of the piece left and improve that point and print again.
Drill Holder
A few years ago, i bought this all-metal piece to support the drill. The piece holding the drill ended up breaking. It was years and years like that, it was never used again. Until I decided to make a new one, here's what came out:
Fig.1 - Drill holder.
Fig.2 - Drill holder II
Fig.3 - Drill holder III.
Fig.4 - Drill holder with drill.
Fig.5 - Drill holder with drill II.
Fig.6 - Drill holder overview.
The previous piece was in metal and ended up breaking. The material i used to print this piece was ABS and it's 100% solid, let's see how long it lasts ...
The tests i did at first, passed all of them.
If the piece is broken, there are two solutions, print another new one, the design / work is already done, just start printing or if you want to improve, look at which part of the piece left and improve that point and print again.
Leave A Comment